1. <rp id="m84gw"></rp>
        1. <button id="m84gw"></button>
            1. ICP-MS玻璃霧化器 - 康潤實驗 | 實驗室儀器設備及實驗室消耗品一站式供應商
              • 產品分類
              • 品牌分類
              推薦產品
              J.T.Baker高純硝酸(9761-80)
              CRM-PE001鄰苯二甲酸酯固態標樣
              四乙基硼酸鈉 11-0575
              1-10種PBDE多溴聯苯醚混標S-15497-10X
              ICP-MS加標樣用泵管 12根/包
              ICP等離子及輔助氣管
              安捷倫ICP石英炬管2010090400
              ICP-MS玻璃霧化器
              ICP高鹽霧化器(2010096400/AR30-07-FSS2E)
              安捷倫ICP霧化室(貨號:2010081700)
              ICP-MS稀釋連接桿(Quartz connector tube, dilution, HMI kit)
              ICP-MS鎳截取錐G3280-67041
              ICP-MS采樣鎳錐G3280-67040
              當前位置: 首頁 > 產品展示 > ICP&ICP-MS配件 > ICP|ICP-MS|AA霧化器 > ICP-MS玻璃霧化器
              ICP-MS玻璃霧化器
              • 產品名稱:ICP-MS玻璃霧化器
              • 型號規格:G3266-65003
              • 產品貨號:GP000244
              • 市場價格:0
              • 品牌分類:(美國)Agilent(Varian)
              • 商品介紹
              MicroMist nebulizer (Glass), 1/pk
              Standard on 7700x/e and 7500cx/ce.
              When ordered for the 7500a, the spray chamber
              • 規格參數
              scription Specifications Use Unit 7700
              Part No.
              7500
              Part No.
              MicroMist Nebulizer Borosilicate glass Standard on 7700x/e and 7500cx/ce.
              When ordered for the 7500a, the spray chamber
              end cap (G1833-65475) is also required.
                G3266-65003 G3266-65003
              Sample tubing 0.25 mm ID, 700 mm,
              with connector
              For MicroMist Nebulizer 10/pk G3266-80010 G3266-80010
              Sample tubing 0.5 mm ID, 700 mm,
              with connector
              For MicroMist Nebulizer 10/pk G3266-80011 G3266-80011
              Carrier gas connector   For MicroMist Nebulizer   G3266-80015 G3266-80015
              Nebulizer cleaner   For MicroMist Nebulizer   G3266-80020 G3266-80020
              MicroFlow Nebulizer PFA, 200 μL/min     G3139-65100 G3139-65100
              MicroFlow Nebulizer
              with I-AS probe
              PFA, 200 μL/min Standard on 7700s and 7500s   G3139-65102 G3139-65102
              MicroFlow Nebulizer PFA, 20-50 μL/min     G3139-65106 G3139-65106
              MicroFlow Nebulizer
              with I-AS probe
              PFA, 20-50 μL/min     G3139-65108 G3139-65108
              Carrier gas line connector   For MicroFlow Nebulizer 2/pk G1833-65583 G1833-65583
              Mira Mist Nebulizer PTFE     G3161-80000 G3161-80000
              Mira Mist Nebulizer PEEK For high solids applications such as environmental,
              geological, etc. Not for semiconductor use since
              it does not self aspirate. When ordered for
              the 7500a, the spray chamber end cap
              (G1833-65475) is also required (included
              with 7500cx/cs).
                G3161-80001 G3161-80001
              Babington Nebulizer Includes Viton O-ring,
              PTFE sample tubing,
              and connector
              Use to introduce samples with high matrix
              and high total salts. Clean when contaminated
              or when orifices are clogged.
                  G1820-60453
              End cap for Babington
              Nebulizer, polypropylene
              Includes Viton O-rings Replace when memory effects do not disappear
              after cleaning. Insert nebulizer in middle of end
              cap all the way through. Attach end cap to spray
              chamber with "TOP" mark facing up.
                  G1833-65476
              Babington Nebulizer
              removal tool
                      G1820-65345
              Concentric Nebulizer,
              Pyrex
              Use with P/N
              G1820-65052
              Argon gas connector,
              P/N G1820-60160
              Connector kit, P/N
              G1820-65121 end cap
              Use with clean samples only. Not resistant
              to hydrochloric acid. Clean with a 5% HNO3 (v/v)
              bath; do not use ultrasonic bath.
                G1820-65030 G1820-65030
              Concentric Nebulizer,
              quartz
              Use with P/N
              G1820-65337
              Quartz spray chamber,
              P/N G1820-80237
              Quartz connecting pipe
              Recommended for trace analysis of clean samples.
              Lower contamination level than Pyrex. Clean using
              5% HNO3 (v/v) bath; do not use ultrasonic bath.
                G1820-65138 G1820-65138
              Connector for carrier gas
              line, polypropylene
              4 mm tubing, includes
              ferrule and O-ring
              For gas line connection to Concentric Nebulizer   G1820-65052 G1820-65052
              Sample tubing with
              connector, PTFE
              Tool included For Babington Nebulizer, replace when heavily
              contaminated by high matrix samples.
                  G1820-65276
              Sample line connector Includes Viton O-ring Connects Concentric Nebulizer with sample line.
              Port with large hole connects to nebulizer; smaller
              port connects with sample tubing.
                G1820-60160 G1820-60160
              Union fitting 4 mm tubing For PFA Concentric Nebulizer   5064-8078 5064-8078
              Ferrule and Viton O-ring
              kit for carrier gas line
              connector
                For Babington/Concentric Nebulizer   G1820-65533 G1820-65533
              End cap for Concentric
              Nebulizer, PTFE
              Includes Viton O-rings Connects the Concentric Nebulizer (Pyrex or
              Quartz) with the spray chamber. For MicroMist,
              MicroFlow, and other concentric nebulizers.
                  G1833-65475
              O-rings for Babington
              Nebulizer, Viton
                Used to create seal between Babington
              Nebulizer and end cap.
              4/pk   G1820-65199
              O-ring kit for Concentric
              Nebulizer, Viton
              2 sizes, 10 each   20/pk G1820-65491 G1820-65491
              O-rings for Concentric
              Nebulizer, for organic
              solvents (3 types)
                  4/pk G1820-65520 G1820-65520
              O-rings for end cap, Viton   Use for the end cap of the Babington Nebulizer,
              Cross Flow Nebulizer and Concentric Nebulizer.
              5/pk   G1820-65198
              O-rings for end cap,
              for organic solvents
                  2/pk   G1820-65518
              CrossFlow Nebulizer Includes bushing,
              carrier gas line
              connector, blend gas
              line connector, sample
              tubing, and gas line
              tubings with
              inner sleeves
              Standard nebulizer for the inert kit.
              Resistant to hydrofluoric acid. Set carrier
              gas pressure to 500 kPa (5 kg/cm2).
              Clean with 5% HNO3 (v/v) bath. Replace
              when memory effects remain after cleaning.
                  G1833-65462
              国产免费人成在线视频_4399影院在线观看_各种姿势玩小处雏女视频_在线a亚洲v天堂网2019